ADVERTISEMENT
—
## Step-by-Step: Remove Mold in Just 10 Minutes
### 1. **Apply the Vinegar or Hydrogen Peroxide**
Soak cotton balls or paper towels in **white vinegar** or **3% hydrogen peroxide**, then press them directly onto the moldy silicone. Make sure the moldy areas are fully covered.
### 2. **Let It Sit**
Leave the soaked cotton or towels on the moldy spots for **10 minutes**. This gives the vinegar or peroxide time to break down the mold spores.
### 3. **Scrub Gently**
Remove the cotton and use an old toothbrush to gently scrub away the loosened mold. Most of it should come off easily with minimal effort.
### 4. **Rinse and Wipe**
Rinse the area with warm water and wipe clean with a dry cloth. If needed, repeat the process for any stubborn spots.
—
## Extra Tough Mold? Try This:
Mix a **paste of baking soda and vinegar**, apply it to the silicone, and let it sit for 10–15 minutes. Then scrub and rinse as usual. You can also add a few drops of **tea tree oil** for a natural, mold-fighting boost.
—
## Keep It Away: How to Prevent Mold from Coming Back
– **Dry the area** after showers using a squeegee or towel
– **Improve ventilation** by running an exhaust fan or opening a window
– **Use a daily shower spray** made from vinegar and water
– **Re-caulk** if the silicone is cracked or peeling
—
## Clean, Fresh, and Mold-Free in Minutes
With this simple method, you can say goodbye to ugly black mold on your silicone—and keep your bathroom looking and smelling fresh. No expensive cleaners, no harsh chemicals—just fast, effective, and natural cleaning.
—
Would you like a printable version of this cleaning guide or a DIY mold-prevention spray recipe?
