ADVERTISEMENT
3. **Add Vinegar**
Pour 2 cups of white vinegar into the detergent dispenser. Vinegar acts as a natural disinfectant and helps to dissolve grime, soap scum, and mineral buildup.
4. **Run a Hot Water Cycle**
Select the hottest water setting and run a full wash cycle. The hot water helps dissolve any buildup of soap, mold, and mildew, while the vinegar and baking soda work together to eliminate odors and disinfect the interior of the machine.
5. **Wipe Down the Drum**
Once the cycle is complete, wipe down the inside of the drum with a clean cloth to remove any remaining residue or water droplets. This helps prevent the buildup of mold or mildew.
6. **Repeat if Necessary**
If the smell persists, you may need to run a second cycle with vinegar and baking soda to remove stubborn odors.
#### **Method 2: Hydrogen Peroxide**
Hydrogen peroxide is another great natural cleaner that has disinfectant properties. It helps to kill bacteria and mold in your washing machine.
**Instructions:**
1. **Add Hydrogen Peroxide**
Add 2 cups of hydrogen peroxide (3% solution) into the detergent drawer or directly into the drum.
2. **Run a Hot Water Cycle**
Select the hottest water setting and run a full wash cycle. The hydrogen peroxide will help eliminate bacteria, mold, and mildew.
3. **Wipe Down the Interior**
After the cycle is complete, wipe down the interior of the drum with a clean cloth.
Hydrogen peroxide is effective for cleaning and sanitizing, and it’s also a natural bleach alternative that can brighten your washing machine.
### **2. Cleaning the Rubber Door Seal and Gaskets**
For front-loading washing machines, the rubber door seal (also known as the gasket) is one of the most common areas for mold and mildew buildup. It’s important to clean and disinfect this area regularly to prevent musty odors.
#### **Method 1: Vinegar and Water Solution**
**Instructions:**
1. **Mix the Solution**
Mix equal parts of white vinegar and water in a spray bottle.
2. **Spray the Gasket**
Spray the vinegar solution onto the rubber gasket around the door. Pay close attention to any areas with visible mold or mildew buildup.
3. **Scrub the Gasket**
Use an old toothbrush or a cleaning cloth to scrub the gasket, working the solution into any crevices. Be sure to clean under the folds of the rubber seal, where moisture tends to collect.
4. **Wipe Dry**
After scrubbing, wipe down the gasket with a dry cloth to remove excess moisture.
#### **Method 2: Baking Soda Paste**
If you notice stubborn mold or mildew, a baking soda paste can be particularly effective for scrubbing away buildup.
**Instructions:**
1. **Make a Paste**
Mix 1/4 cup of baking soda with a small amount of water to form a paste.
2. **Apply the Paste**
Apply the paste directly to the affected areas of the rubber gasket.
For Complete Cooking STEPS Please Head On Over To Next Page Or Open button (>) and don’t forget to SHARE with your Facebook friends
