ADVERTISEMENT
How to Wrap Aluminum Foil Around Your Bathroom Drain Pipes
If you’re ready to try out this technique, here’s how to do it:
- Clean the Pipes Before applying any foil, make sure the area around your drain pipes is clean and dry. Wipe down the pipes with a cloth to remove any dirt, dust, or moisture. This will help the foil adhere better.
- Cut the Aluminum Foil Tear off a few sheets of aluminum foil, depending on the length of your drain pipes. You want enough foil to wrap around the pipes securely but not so much that it’s wasteful.
- Wrap the Foil Around the Pipes Starting from the top of the drain pipe, begin wrapping the foil around the pipe, overlapping as you go. You don’t need to make it tight, but ensure it’s snug enough to stay in place. Continue wrapping until you’ve covered the entire length of the pipe that’s exposed.
- Smooth the Edges Once the foil is in place, use your fingers to smooth the edges and make sure there are no loose ends. If needed, use a bit of tape to secure the foil in place.
- Check Periodically Check your aluminum-wrapped pipes every few months to make sure the foil is still intact and there’s no damage. If the foil starts to peel off or show signs of wear, simply replace it with a fresh sheet.
Final Thoughts
While my grandpa’s advice may have sounded odd at first, it turns out that wrapping aluminum foil around your bathroom drain pipes could have multiple benefits. From protecting against rust and corrosion to reducing static electricity and deterring pests, this simple and inexpensive solution might just be the trick you need to keep your plumbing in tip-top shape. So, next time you’re looking for an easy DIY plumbing hack, you may want to consider grabbing some aluminum foil—it could save you time, money, and frustration in the long run!
