ADVERTISEMENT
### **Steps to Remove Rust Using Baking Soda:**
1. **Create a Paste**:
– In a small bowl, mix **two tablespoons of baking soda** with a few drops of water. Stir the mixture until it forms a thick paste. The consistency should be similar to a toothpaste, not too runny.
– For an extra boost, add a **tablespoon of white vinegar or lemon juice** to the paste. This addition will help break down the rust more effectively. The vinegar or lemon juice reacts with the rust and makes the cleaning process faster and easier.
2. **Apply the Paste to the Rusted Surface**:
– Using your **scrub brush** or **sponge**, apply the baking soda paste directly to the rusted area. Make sure the entire rust patch is covered by the paste.
– If the rusted area is large, work in small sections to ensure you apply the paste evenly.
3. **Let it Sit for a Few Minutes**:
– Allow the paste to sit on the rusted surface for about **5 minutes**. This gives the baking soda time to break down the rust and allows the vinegar or lemon juice (if used) to dissolve the corrosion.
– During this time, the rust should begin to loosen and soften.
4. **Scrub the Rust**:
– After the paste has had a few minutes to sit, use your scrub brush or sponge to scrub the rusted area. You should see the rust coming off in flakes or clumps. The **abrasive action of the baking soda** helps lift the rust off the surface without scratching or damaging the metal.
– For more stubborn rust, you can apply a bit more paste and scrub again.
5. **Rinse and Dry**:
– Once the rust is removed, rinse the metal object with clean water to remove any residue from the baking soda paste.
– Use a clean cloth to wipe down the surface, making sure it is completely dry. This will help prevent further rust from forming, as moisture is one of the primary causes of oxidation.
6. **Repeat if Necessary**:
– If some rust remains, repeat the process. Rust removal can sometimes require a second or third application, depending on how extensive the rust buildup is.
### **Why This Method Works**
The key to this trick’s success lies in the combination of **baking soda’s mild abrasiveness**, its **alkaline nature**, and the **acidic properties of vinegar or lemon juice**.
– **Baking Soda**: Baking soda is slightly abrasive, which allows it to scrub away rust without damaging the underlying metal. Its mild alkalinity helps to dissolve acidic corrosion, making it perfect for neutralizing the effects of rust.
– **Vinegar/Lemon Juice**: Both vinegar and lemon juice are acidic, which helps to break down the iron oxide that forms rust. This softens the rust, allowing it to be scrubbed off more easily.
– **Time and Gentle Scrubbing**: The key to this method is patience. Allowing the paste to sit on the metal surface gives the rust time to loosen and dissolve. Gentle scrubbing is usually sufficient to remove the rust without damaging the metal underneath.
### **Additional Tips and Tricks for Rust Removal**
While the baking soda method is effective for light to moderate rust, here are a few additional tips for more stubborn rust or delicate items:
– **Use Aluminum Foil**: If you have stubborn rust that won’t come off with a brush, try using a ball of **aluminum foil**. Dampen the foil and rub it over the rusted surface. Aluminum foil can be just abrasive enough to remove the rust without scratching the underlying metal.
– **For Heavy Rust**: If the rust is particularly thick or widespread, you might need to soak the object in **white vinegar** for several hours before applying the baking soda paste. After soaking, scrub the rust with the baking soda paste to finish the job.
For Complete Cooking STEPS Please Head On Over To Next Page Or Open button (>) and don’t forget to SHARE with your Facebook friends
