ADVERTISEMENT

The washing machine is shaking and making noise. Try this trick immediately.

ADVERTISEMENT

🌀 The Washing Machine Is Shaking and Making Noise? Try This Trick Immediately!

Nothing disrupts a peaceful home like a washing machine that sounds like it’s about to take flight. If yours is shaking violently, rattling, or making loud banging noises during a spin cycle, don’t panic — you’re not alone. And the best part? There’s a simple trick that can fix it immediately, no repairman needed.

Let’s dive into why this happens and the quick solution that might just save your laundry day (and your nerves).


🚨 Why Is Your Washing Machine Shaking or Noisy?

A shaky or noisy washer is more than just annoying — it can lead to bigger problems like:

  • Internal damage to the drum or motor
  • Water leaks
  • Unbalanced loads that don’t clean properly
  • Damage to your floors

The most common cause? An unbalanced machine or uneven load.


✅ Try This Quick Trick to Stop the Shaking

Before you call a technician or start pulling your hair out, try this:

🎯 The Towel Balancing Trick

This works especially well with top- or front-loading machines that shake during the spin cycle.

What to Do:

  1. Pause the cycle and open the lid or door.
  2. If your load is mostly heavy items (like towels, jeans, or a single blanket), the weight may be uneven.
  3. Redistribute the laundry evenly around the drum.
  4. If the load is small, add 1–2 large towels to balance out the weight.
  5. Restart the machine and let it spin.

💡 This simple trick can immediately reduce vibration and noise by balancing the weight inside the drum.


🔧 Other Common Causes & Fixes

If the towel trick doesn’t solve the issue, here are a few other things to check:

1. Check the Level

  • Place a spirit level on top of the washer.
  • If it’s off-balance, adjust the feet — most washers have screw-in adjustable legs.
  • For Complete Cooking STEPS Please Head On Over To Next Page Or Open button (>) and don’t forget to SHARE with your Facebook friends

2. Remove Shipping Bolts (for New Machines)

  • If your washer is brand new, ensure the shipping bolts (used during transport) have been removed.