ADVERTISEMENT
Key fobs typically use a small coin-cell battery, and the device usually stops working when the battery becomes depleted. However, other factors such as signal interference, malfunctioning components, or damage to the fob itself can also cause it to fail.
When your key fob dies, it might feel like you’re stuck outside your vehicle with no way to get inside. However, there are several methods you can try to work around this issue.
## **1. Replace the Battery**
The first and simplest step to take when your key fob dies is to replace the battery. Most key fobs use small coin cell batteries (such as CR2032 or CR2025), which can be purchased at most grocery stores, hardware stores, or online retailers. Here’s a simple guide to replacing the battery:
### **How to Replace the Battery in Your Key Fob**
1. **Identify the type of key fob**: Before you begin, check the make and model of your key fob. The process may vary slightly depending on the car manufacturer. Refer to your car’s user manual if necessary.
2. **Open the key fob**: Most key fobs are held together by small screws or clips. Use a flathead screwdriver or a plastic pry tool to carefully open the casing. Be careful not to break any components or damage the casing.
3. **Remove the old battery**: Once you’ve opened the fob, remove the old battery. Note the orientation of the battery—pay attention to which side is facing up so you can insert the new one correctly.
4. **Insert the new battery**: Place the new coin cell battery into the fob, making sure it’s inserted in the same orientation as the old one.
5. **Reassemble the key fob**: Close the fob, ensuring all parts are securely reattached. If there are screws, use a small screwdriver to tighten them.
6. **Test the fob**: After reassembling the fob, test the buttons to ensure everything is working properly. If the car responds to the key fob’s commands, you’re all set.
Replacing the battery is the most straightforward solution, and in many cases, it will solve the problem. However, there are times when a dead battery isn’t the only issue, and you may need to resort to other methods.
## **2. Use the Physical Key Inside the Fob**
Many key fobs come with a hidden physical key inside them that you can use if the battery dies. This is especially helpful if you’re locked out of your car and need to gain access manually. Here’s how to use the physical key inside your key fob:
### **How to Use the Physical Key**
1. **Locate the emergency key**: On most key fobs, there’s a small release button or sliding mechanism that allows you to remove the physical key. It’s often located on the back or side of the fob.
2. **Remove the key**: Once you’ve located the release mechanism, pull out the emergency key. This key can be used to manually unlock your car doors.
3. **Unlock your car**: Insert the physical key into the car’s door lock and turn it to unlock the door. In most cases, the driver’s side door will be the easiest place to use the key.
4. **Start your car**: After you’ve gained access to your vehicle, you can still start the car by inserting the key fob into the ignition or pressing it against the “start button” (depending on the car model). Some modern cars have an emergency starting method, where you place the fob close to the push-to-start button, even if the fob’s battery is dead.
While this method won’t allow you to operate your car remotely, it provides a quick way to get inside and start your vehicle manually, even when your key fob is unresponsive.
## **3. Use a Spare Key Fob**
If you have a spare key fob, now is the time to use it. Many people forget that they have a backup fob hidden away or stored in a safe place, and it can be a lifesaver when the main key fob dies.
For Complete Cooking STEPS Please Head On Over To Next Page Or Open button (>) and don’t forget to SHARE with your Facebook friends
